Why Are Your Cannabis Seeds Not Germinating?
Many first-time growers and inexperienced planters often experience this problem when trying to cultivate cannabis seed. They end up languishing and wondering why their effort is not yielding since a cannabis seed has a pretty high germination rate (99%). However, many things might not promote the germination process.
Generally, cannabis seeds are powerful and grow pretty fast. If the seeds do not germinate, there is likely a problem with the germination method. This article will explore many things that can go wrong when trying to cultivate cannabis seeds.
The chances of having a viable seed increase significantly if the genetics is good. This is pretty important as it can avoid wasting energy and effort trying to germinate a bad seed. When you buy good quality seeds from trusted banks, you can breathe a sigh of relief, knowing that your actions will not be wasted.
As a result, it is not a good idea to grow seeds that you stumbled on inside a cannabis bag you got. Such seeds could be infertile and may not germinate. If it eventually germinates, you might not like cannabis. Make sure to buy the right seed from reputable stores and increase the chances of germination.
Direct Soil Germination
This is one of the top reasons your cannabis seed is not germinating. If you do not water the substrate before sowing the seeds and water afterward, there is a high probability that the seeds will not grow. This is not surprising as the seeds could be buried too deep, and adding water after sowing worsens this.
You can obtain good results by germinating the seeds in jiffy pellets, peat plugs, or using kitchen paper and later transplant them to a pot or the soil when the small seedlings come out. Make sure to care for your tender plant at this stage. Limit irrigation, support the right temperature and use Northern lights when growing indoors.
Wrong Temperature and Humidity
The ideal temperature for germinating cannabis seeds is high humidity and high-temperature levels. It is essential for people in tropical countries to provide external support of heat to get the temperature within reasonable and acceptable ranges. This is where heated greenhouses come in. Not only do they provide the right temperature, but they can get the humidity level to the ideal range essential for germinations. A cannabis seed needs 70% relative humidity and an average temperature of about 270C for germination.
If the temperature and relative humidity ranges are lower than the ideal value specified, the growth rate will be slow and unsuccessful. Excessive range, on the other hand, can lead to fungal problems.
Seeds Planted too Deep.
The amount of energy available to a germinating cannabis seed is limited. As a result, if planted too deep, it might not have the required energy to make its way up. A seed planted underground will have no light and is not producing food yet since no photosynthesis. Planting seed too deep creates extra stress for the seedling as migration to the surface becomes an issue.
As a result, you should plant your cannabis seed around 2 to 3 cm down or half inches deep. With this, they have enough room to grow taproots. This might be one of the reasons your cannabis seed didn’t grow.
Using Old or Unsterilized Pots and Soils
A fungus is one of the greatest enemies that might affect the germination of cannabis seed. If you reuse soil and it is not sterilized, there is a high chance of mold and other unhealthy organisms like insects and bacteria. As a result, the seeds may not sprout at all. Even if they grow, these organisms might kill them after a couple of days. For instance, a sprouting seedling might suddenly bend and change color to brown in a process known as damping off. This is common when you supply the seed with too much water when there is poor drainage or the aeration is poor.
Due to this, consider planting seedlings in a sterilized pot as the tendency of containing harmful organisms is low. Also, make sure the containers are clean as it can reduce the tendency of fungus.
Planting lots of Seed in one Pot
Planting a lot of seed in a single container might seem like a good idea due to the ability to save cost. This is like shooting yourself in the leg, as it might lead to a wasted effort. Even if the seeds germinate, they will compete for limited space, nutrients, and water. A cannabis plant needs enough space for its root to travel down without restriction to prevent severe intermodal distance.
Limited space translates to severe competition not only for nutrients but light as well. This is not a good idea if you want to get the best from your cannabis seed. If the seed eventually germinates, they will be weak, which will affect the plants and overall output.
Cannabis Seed left underwater for a long time.
Some growers prefer to soak their cannabis seeds before planting them. This is an essential step to break the dormancy and soften the shell to prepare the seed for planting. With a softshell, the taproot will easily break the body and push its way out of the shell. Typically, the seed will be put inside a glass of water and left until it sinks before the grower plants it. However, this is not as simple as it sounds.
A cannabis seed needs to be continually breathing, and a fully submerged seed will not get the necessary air supply. This might kill the seed if left for long inside the water. Once the seed sinks, take them inside the paper towel as soon as possible.
There are many intricacies involved in germinating a cannabis seed. Getting it wrong with any of the systems might not make the cannabis seed grow. You can arm yourself with these essential tips to ensure that your cannabis plants germinate. Use these tips as a guide when trying to germinate your cannabis seed. Also, if your seed does not germinate, this guide can help you troubleshoot.
Do you have a news tip? Call us at (661) 298-1220, or send an email to [email protected] Don’t miss a thing. Get breaking KHTS Santa Clarita News Alerts delivered right to your inbox. Report a typo or error, email [email protected]
KHTS FM 98.1 and AM 1220 is Santa Clarita’s only local radio station. KHTS mixes in a combination of news, traffic, sports, and features along with your favorite adult contemporary hits. Santa Clarita news and features are delivered throughout the day over our airwaves, on our website and through a variety of social media platforms. Our KHTS national award-winning daily news briefs are now read daily by 34,000+ residents. A vibrant member of the Santa Clarita community, the KHTS broadcast signal reaches all of the Santa Clarita Valley and parts of the high desert communities located in the Antelope Valley. The station streams its talk shows over the web, reaching a potentially worldwide audience. Follow @KHTSRadio on Facebook, Twitter, and Instagram.
Common Cannabis Seedling Problems and How To Fix Them
Problems with seedlings are common and can end up affecting them further into their life cycle so it’s vital you detect and fix them as soon as you can. Yellowing or deformed leaves, burnt tips, or even slow growth are signs of cannabis seedling problems, even though your seedling may be able to recover, it may have a toll on the final size and yields of your cannabis plants. It’s definitely not hard to detect when something’s wrong, but if you’re a new grower, first you should know what a healthy seedling looks like.
1. Healthy Cannabis Seedlings
Cannabis seedlings start with two tiny round leaves called “cotyledons”, these leaves are already formed inside the seed and open up once the seed has been successfully germinated, after a couple of days, the first serrated leaves will appear, which indicates that your weed seedling is starting to grow.
As your seedling start developing, the first pair of true leaves will appear, the true leaves are the typical fingered leaves everybody knows, all of the leaves up to this point should be bright green, if not, it’s a sign that something is wrong, to help you diagnose what you may have, here are the most common cannabis problems.
Overwatering is one of the most common cannabis seedling problem amongst growers, even though weed plants need water to grow, they also need oxygen to properly develop, and when overwatering, you may end up drowning your plants because of the lack of oxygen. What about plants grown in hydroponics? Well, in hydroponic setups, about ⅓ of the roots are kept out of the water, this way they can breathe at the same time that they absorb water so even though the roots are in the water, they still get the oxygen they need.
When your plants don’t get the amount of oxygen they need, the leaves will start getting droopy and if you don’t treat it for long, the leaves will start to get yellow. If you are seeing any of these symptoms, it’s most likely the problem is being caused by any poor drainage or watering too often.
How to fix it
- Don’t leave plants sitting in runoff water.
- Get better containers such as Smart pots or Air pots.
- Mix perlite into the soil to increase drainage and oxygenation.
- Make drainage holes on the bottom of the container to allow water to drain.
Just like overwatering, underwatering is very common, especially among new growers who want to prevent overwatering and it can be quite confusing because the symptoms are basically the same as when overwatering.
It’s essential you ensure your plants have access to water at all times, the roots should be kept moist always because plants are constantly losing water through the process of transpiration and they need to be able to replenish the water in the leaves. When there’s not enough water, cannabis plants stop performing their basic processes and dry out, eventually killing them so even though you should be careful when watering, you should definitely keep your plants watered to avoid seedling problems.
How to fix it
- Ensure the top part of the soil is always moist.
- Mix soil with coco fiber or vermiculite to improve water retention.
4. Nutrient Problems
Just like the symptoms of overwatering or underwatering, plants that suffer from a nutrient excess (overfeeding) will start to get yellow leaves or yellow spots, burnt tips, or show slower growth. Seedling problems related to nutrients are usually caused by giving nutrients too soon, giving too many nutrients at once, or “hot” super soil or pre-amended soils. Giving too many nutrients at a time can cause problems overnight, so we recommend watering your seedling with plain water and taking a look at the following table so you prevent any seedling problems related to nutrients.
|The ideal water for seedlings|
|Coco, clay pellets, and hydro||5.5-6.2||300-400|
Have in mind that these are estimates and you should check every day for problems and lower or increase these numbers if you see signs of deficiencies. Giving nutrients too soon will overload the soil, and consequently, your seedling so remember that you shouldn’t feed for the first couple of weeks or at least give a low nutrient dose.
This can also happen with organic super soil, even though it’s organic, you need to wait until your super soil isn’t “hot” anymore, “hot” soil means that the mix is still undergoing biological activities so you will have to wait around 30-45 days before you can use it, although this is not the case with all super soils so make sure you get more information on the product you’re using to avoid seedling problems.
How to fix it
- Ensure you adjust the nutrient dose according to the medium you’re growing in.
- Wait at least 10 days before you start feeding your plants.
- Read the instructions on the products you’re using.
5. Excessive Heat
Excessive heat can also affect your plants, which will end up showing signs of heat stress, you will see the edges of the leaves turning up like tacos and they will start to get dry and crispy, and in more extreme cases, the leaves will start showing a yellowish-green color.
This can be caused by elevated temperatures, low humidity, or even the fans being too strong, but luckily, this can be easily spotted before your plants start showing the symptoms because you will see the soil is dry and sometimes it will start to crack.
How to fix it
- Make sure the temperature and humidity are at the right levels.
- Place your hand under the light fixture, if it’s too hot for you, it definitely is for your plants.
- Ensure your fans are not too strong for the stage your plants are in.
6. Too Much (or Too Little) Light
Another common problem among new growers is not providing enough or providing too much light in the seedling stage, if your seedlings are not getting enough light, they will start stretching and the stem will get super long, which is a bad thing because they can easily snap and there’s no way to fix it.
Now, when your seedlings are getting too much light, or the lights are too close to them, the seedling will get dehydrated and the leaves will get burnt, showing symptoms like burned and wrinkled leaves.
How to fix it
- Adjust the light fixture’s distance from the seedling every day, try to find the sweet spot.
- Use CFLs instead of potent LEDs or HPS to avoid this kind of problem.
7. Seed Shell Stuck on Seedling
Sometimes, when a seedling comes out of the substrate you’ll see how the seed shell is stuck on the seedling and won’t come off naturally. When this happens, your seedling won’t be able to develop properly and you’ll probably see a lot of stretching, and if left for too long, the seedling can end up dying. This happens because of the humidity levels, so in order to minimize the damage, there are a couple of things you can do.
How to Fix It
As mentioned, this happens because of humidity levels, low humidity levels to be precise, so what you need to do is hydrate the seed shell. So go ahead and spray the seedling with plain water or just drop one or two droplets of water on the seed shell, this will hydrate it enough for the seed shell to fall off. Keep in mind that sometimes the seed shell falls off but a membrane covering the cotyledons can remain stuck and your seedling will not be able to open so make sure to grab some tweezers or remove the membrane with your fingers but do it very, very carefully.
If you need to do it asap and don’t want to wait for the seed shell to fall, you can remove it by hand without spraying it but keep in mind that if the seedling’s roots have not grown enough, you can end up removing the seedling from the soil so do not use excessive force. It’s highly recommended to hydrate the seed before just to avoid shock or stress, especially to avoid removing the seedling from the substrate completely.
- Make sure to keep the humidity levels in range with the help of a humidifier.
- Place a plastic dome (like a cut-out plastic bottle or plastic cup) on top of the seedling to help keep higher humidity levels.
8. What To Have in Mind During The Cannabis Seedling Stage
In order to avoid all the cannabis problems mentioned throughout the article, here are the main tips that will help you avoid them and keep your cannabis seedlings healthy and happy.
The Perfect Environment
The relative humidity and temperature will directly affect how your seedling grows so make sure the light is not too strong but your cannabis is still getting enough light and the temperature is around 21-23 ºC and the relative humidity ranges from 70-80%. Failing to provide good conditions can affect plant growth and can ultimately kill your plants if left untreated for too long, so here’s what to expect in the different conditions:
Substrate is too wet
If the substrate is too wet, the seeds can drown. Despite seeds being germinated in water, it’s not okay for the substrate to be extremely wet so always make sure the substrate is moist but not soaking.
Substrate is too dry
Cannabis seeds need moisture to germinate so make sure the substrate is moist but not excessively wet as excessive dryness can make your seeds not germinate and die.
Watering cannabis seedlings properly is the hardest part for beginner growers, watering too much can result in an overwatered cannabis plant, and watering too little can result in an underwatered weed plant so make sure you start watering with around 100 ml and increase the amount according to how your plants grow.
Seeds were planted too deep
1 – 3 cm is the deepest you should go in order to provide support to the roots and cover the seeds with the substrate. If you plant the seeds too deep the seedling could have a hard time sprouting out of the substrate so do not plant it too deeply.
Environment is not warm enough
Seedlings prefer warmer temperatures ranging from 22 -26 celsius and will grow at a slower rate in colder temperatures.
Environment is too humid
It’s recommended to use a plastic dome for newly born seedlings but remember to remove them as soon as the seedling starts developing the first pair of one-fingered leaves after the cotyledons as a high humidity can cause damping off, which results in seedlings folding over and dying.
Marijuana light burn can indeed hurt your plants if the light is too strong. Seedlings are more fragile than adult weed plants so make sure you dim down the light or adjust the fixture’s light to avoid stressing them. Also, if your seedlings are stretching a lot it means they need more light so, if this happens, increase light intensity or place the light fixture closer.
9. FAQs About Cannabis Seedling problems
Here are the most frequently asked questions about cannabis seedling problems to help you understand a bit more and help you deal with them. Just remember that different problems may have similar symptoms so make sure you are 100% sure about what the problem is before taking drastic measures.
“Why are my seedling’s leaves turning yellow? Could it be a cannabis nutrient deficiency?”
When the leaves start yellowing it’s probably a sign of nutrient problems, this means they’re either lacking nutrients, are getting too many nutrients or getting the wrong type of nutrients.
“When should I remove the plastic dome of the seedlings?”
The plastic dome helps raise humidity for faster germination so you can remove it as soon as your plant has completely developed a pair of leaves (after the cotyledons).
Remove the plastic dome once the seedling has developed the first pair of leaves after the cotyledons.
“Why are my cannabis seedling’s leaves curling down?”
This usually happens when you overwater your seedlings or when they’re exposed to higher temperatures so make sure the temperature ranges from 20 – 25 ºC and pay attention to how much water you’re watering with.
“When is it safe to put my cannabis seedlings under the light?”
Well, your seedling needs to be under light since germination but you can use a 15-20 W fluorescent light during the first 1-2 weeks and once the first pair of true leaves have completely developed, you can go ahead and place it under the LED or MH bulb.
“Is there a better light schedule for marijuana seedlings?”
The best light cycle for both autoflowering and photoperiod cannabis seedlings would be 18/6 from seed.
“Is the substrate super important for seedlings?”
Of course, the substrate mix is super important for a healthy start. Some growers prefer a “light mix” which can provide nutrients for the initial weeks and others make their own blends with perlite and coco fiber. There’s no best substrate but a substrate mix that allows for good oxygenation and water retention is ideal.
“Why are my marijuana seedlings growing so slow?”
This is the hardest question because it can be caused by several things. Your cannabis seedlings may be lacking nutrients or it could be caused by lack of proper lighting and extreme temperatures or humidity.”
“How far should the grow light be from the cannabis seedling?”
If you’re using a CFL light, the lights should be 5 – 10 cm from the seedlings. If you’re using HPS or MH, the light should be around 25 – 40 cm from the seedlings and if you’re using LEDs, the fixture should be at around 75 cm from the seedling with 40% light intensity if possible.
“How long does it take for the seeds to germinate and the seedling to come out of the soil?”
The germination process is usually quite fast but depending on the quality of the seeds, it may take up to 5 days or even more. Once the seeds have germinated and been planted in the pot, the seedling should take around 3 days to come out of the soil if the growing conditions are proper.
“Is it possible to know my plant’s sex during the seedling stage?”
No, you’ll only be able to tell whether your marijuana plant is a male or female during the pre-flowering stage. This happens because cannabis plants need to sexually mature in order to show either male pollen sacs or female stigmas.
10. In conclusion
Marijuana seedlings are super fragile and sensitive so you should take good care of them, avoiding cannabis growing problems at this stage is vital because even though your baby plants may recover, the size and structure may be affected, which will end up affecting your harvest.
If you have tips you can share with fellow growers to help them take care of their baby plants, feel free to leave a comment in the comment section below!