Growing Seedlings Under Indoor Grow Lights
Anyone who’s tried growing plants from seed knows that proper lighting is critical to producing an abundance of stocky, green seedlings. For those of us lucky enough to have a south-facing window with 12+ hours of full sun, lighting isn’t an issue. But for the rest of us, an indoor lighting system of some kind is a necessity.
This primer on indoor lighting for seed starting will help you choose the options that work best for you.
Light color is also referred to as color temperature, with cool light describing the blue end of the spectrum and warm light being the red end. Sunlight contains the complete spectrum of light, including all colors of the rainbow.
Although plants use the full spectrum for photosynthesis, red and blue light seem to be most critical. Red light stimulates vegetative growth and flowering (but if a plant gets too much, it will become tall and spindly). Blue light regulates plant growth, which makes it ideal for growing foliage plants and short, stocky seedlings (but too much will result in stunted plants).
You can tell which color a grow light produces by looking at its Kelvin rating. Lamps with a rating of 5000 Kelvins will appear bluish, while those with a 2500 Kelvin rating will be reddish.
The intensity of light that a plant receives is determined by the wattage of the bulb and the distance between the plant and the light source. So, for example, a brighter bulb that’s farther away from the plant could provide the same light intensity as a dimmer bulb that’s closer to the plant.
Different plants have different light intensity needs, but most seedlings grown for the garden will need higher intensity light to flourish. In general, the leaves should be about 2 – 4 inches away from the light source (assuming use of a fluorescent bulb – see below).
Duration of Light Exposure
There’s still debate about how many hours of supplemental light is ideal when starting seeds and growing plants indoors.
Most vegetables and garden plants require at least 16 to 18 hours of light each day; without enough light, they get pale and leggy. The conventional advice was to turn lights on for 16 hours each day. However, some growers maintain that 24 hours of consistent light every day provides a better outcome when growing seedling (i.e., there’s no need to give seedlings a nightly rest but this advice doesn’t necessarily apply to full-grown plants).
It’s certainly easier to leave your grow lights on all the time and that’s what I do. If you choose to go with 16 hours on, 8 hours off, put the lamp(s) on a timer so you won’t forget to turn the lights on or off.
Types of Bulbs
You can choose between incandescent, fluorescent, LED, and high-intensity discharge (HID) bulbs, each of which has its own pros and cons. Choose the grow light that works best for the type of plants you want to grow and where you plan to grow your seeds.
These include halogen bulbs and are the type of light bulbs still used in most homes (although they’re getting harder to find now that stores are carrying only more efficient bulbs, such as CFLs and LEDs).
Incandescent bulbs are a good source of red light, but a poor source of blue, meaning that plants will likely become spindly when grown under incandescent light.
Incandescent bulbs, and especially halogen bulbs, also produce a lot of heat in relation to the amount of light they give off; plants growing too close to the bulb can be easily burned.
Generally speaking, these are not the best type of lamps for growing seedlings.
These types of bulbs produce two to three times more light than incandescent bulbs for the same amount of energy and are the most inexpensive lights for indoor gardening. However, they usually require bulky external ballasts (like, for example, overhead shop lights) so aren’t as easy to work with as incandescent and LED bulbs.
Cool white bulbs are a good source of blue and yellow-green light, but are a poor source of red light. Plants grown under cool white bulbs will be stocky or even slightly stunted. Warm white bulbs emit plenty of orange and red light, but less light in the blue and green spectrum. These bulbs, when used alone, result in tall, spindly plants. If you are growing seedlings under two-bulb fluorescent fixtures, you can usually achieve a good color balance by combining one cool white and one warm white bulb.
A set of stacked shelves with fluorescent T5 lamps (or LED lamps) makes it easier to grow a large number of seedlings.
Full-spectrum fluorescent bulbs produce a balance of cool and warm light that replicates the natural solar spectrum, although these are less energy efficient than other fluorescent bulbs and tend to produce more heat. But, given the wider range of light frequencies emitted by these bulbs, they are a good choice for growing seedlings.
T5 lamps are fluorescent lamps that are 5/8″ of an inch in diameter, making them much less bulky than typical fluorescent bulbs. These are the lamps you’re most likely to find in grow light kits.
When using fluorescent lamps, be sure that all plants get ample light. For a typical seedling tray, that means using 2 bulbs, ideally with a reflector hood over them to focus all the light on the seedlings below.
LED Grow Lamps
Unlike other bulbs which produce light across a broad spectrum, light-emitting diodes (LEDs) give off light within a narrow band. LEDs designed for growing plants emit light in the two bands that plants need – red and blue. The result is a purple glow that not everyone likes.
LEDs are mercury-free and won’t shatter like glass. These bulbs are long-lived (up to 5x longer than fluorescent lamps) and very energy efficient, but they cost considerably more than fluorescent bulbs.
Research is still ongoing to determine which combination of light frequencies are best for plant growth and how LED grow lights compare to fluorescent bulbs in producing healthy seedlings. I haven’t seen a definitive answer on this one yet but more and more companies are producing LED grow lights and seed-starting kits, and even commercial growers are slowly moving in that direction.
High-Intensity Discharge Lamps
These lamps are used by commercial growers and serious horticulturists. These energy-efficient bulbs generally emit twice the amount of light (lumens) as a fluorescent bulb. However, the bulbs and special fixtures are considerably more expensive than those needed for incandescent or fluorescent lights. They also tend to be high-wattage bulbs, so you need to be sure your electrical system can handle the load. Some of these lights burn so brightly that they must be located in a special room and you’ll need to wear eye protection when working around them.
Metal halide lights emit an intense, bluish-white light that is excellent for growing plants. The foliage stays green and vigorous, and plants are usually stocky and strong. Metal-halide lights are currently the number one choice for serious indoor gardeners. Mercury vapor lamps emit a bluish, relatively well-balanced, high-intensity light. High-pressure sodium bulbs are usually used to promote flowering and fruiting but, when used exclusively, they produce leggy, weak-stemmed plants.
What’s the best option?
For the average home gardener starting seedlings indoors, a fluorescent or LED lamp will usually be the best choice to ensure that your plants get the quality, intensity, and duration of light they need to stay in peak condition.
- Rotate your plants each week. The light from a fluorescent bulb is more intense at the center of the bulb than it is at the ends.
- Replace fluorescent tubes when the ends darken. That means the tube is old and the light output may be less than half of a new bulb.
- Clean your fluorescent bulbs each month. Dust and dirt can dramatically decrease the amount of light emitted.
- Place your hand where the light hits the foliage. If you feel any warmth, the light is too close.
- Move the lamp upward as the seedlings grow; you want to keep the lights about 2-4 inches above the plants.
Good Options for Indoor Grow Lights
No products found.
This kit, also from Gardener’s Supply Company, comes in various configurations, from a single level to this 3-tier version. I’ve been using the tabletop version of this for over 6 years and have been very happy with it.
If you’re looking for an LED grow light kit, this one provides everything you need. The company also seeds seed starting trays and fertilizers.
I don’t have account
Purple lights 600 seeds – (Jasione Laevis)
Purple lights are tufted perennial flower. Short in size but absolutely staggering in looks. Deep blue in colour with white ends and many petals it will grab your attention immediately. Perfect for pots and containers. Summer bedding and borders. Attracts pollinators bringing life to your garden. Easy to care for flower that are a just perfect in every scenario.
Sow: Indoors January – June & September – October
Height: 10-12in (25-30cm)
Bloom Season: June – August
Environment: Full sun,
Soil Type: Sand, Loam, Chalk,
Germination Time: 14-28 days
Temperature: 15-20C (59-68F)
Seeds Watering: Moist
Plant watering: Well-drained
Depth: 1/4in (6mm)
Plant Spacing: 16in (40cm)
Ideal for: Summer bedding, Bee garden, Cottage garden, Pots, Containers, Wild flower, Rockeries, Alpines, Cut flower
Purple Lightning Cannabis Seeds
Purple Lightning is an F-1 hybrid that we first created back in 1995 by crossing our Northern Lights #5 male with a female Purple Indica.
Purple Lightning Cannabis Seeds from British Columbia Seeds
Purple Lightning is an F-1 hybrid that we first created back in 1995 by crossing our Northern Lights #5 male with a female Purple Indica that had been cultivated in B.C for many years prior to that. Very similar to our N.L.#5 in structure but a bit quicker to finish and much stronger smelling. If you do not mind stronger smelling plants in your growroom and want short, high yielding plants that develop beautiful purple accents, then this one is a good choice.