How to Germinate Cannabis Seeds
Germination is the beginning of your cannabis seeds’ life and is easy to master. At this crucial stage, seeds grow and sprout into young seedlings. The best genetics deserve the best start, and all you need is two plates, some paper towel, and water. Apply the best germination method today and enjoy a great harvest.
1. Germination set-up
Prepare the first plate by lining the inside surface with two to three layers of damp paper towel. Drain excess water from your plate.
Place cannabis seeds on the top surface of the damp paper towel. Approximately three per plate; ensure they are not touching but are evenly spaced apart.
Add only a few layers of damp paper towel on top of the seeds, and let any excess water drain from the plate. Too much water lowers the chance of successful germination.
To complete the set-up, place the remaining plate upside-down and on top of the first plate, resembling pearls inside a clam.
Cannabis seeds need a dark, warm, and humid atmosphere to germinate.
Around 21°C (70°F) is perfect. Check the paper towels every second day and if required, spray with water to keep conditions moist for your seeds.
After a few days, tiny roots will begin to emerge. Congratulations! Your seeds have survived their first stage of life. Don’t worry if some of your seeds have not yet changed, they may just need a little more time as germination can take up to 14 days.
3. Plant of the seeling
Once the roots are a few millimetres long, they are ready to be delicately transferred to a small container filled with your growing medium of choice (rockwool, coco-fibre, or soil).
Make a hole in the growing medium that is 2 – 5 mm deep. Use tweezers or your fingers to transfer germinated seeds gently into the hole (root pointing down) and lightly cover with a fine layer of your medium. Do not pat it down too hard. The stem and the first tiny set of leaves, called cotyledons or ‘seed leaves’, should begin to emerge 24 to 72 hours after the seeds are planted.
4. Supplying a light source
Seedlings must be exposed to sunlight once they sprout. Ensure this is a gradual process as too much heat causes stress and will stunt growth.
Find a sunny place where you can begin to increase sun exposure, such as a windowsill. Ensure sun exposure is increased by an hour or so a day.
For an indoor plant you can use a fluorescent light (keep normal distance from bulb) or HID lighting (50-80 cm from the bulb).
Take care in the first week or two, as seedlings are still quite delicate and sensitive to the elements. They won’t need a lot of attention until the vegetative stage so avoid overhandling.
Germination is the beginning stage of the growing cycle, and this easy-to-follow guide gives your premium genetic cannabis seeds the best start to life. Whether you are a first-time home grower or a well-seasoned gardener, share your experience or any questions in the comments down below, as well as your tips and tricks!
Sensi Seeds CBD: Seeds, Oils, Capsules — How They’re Made
Laws and regulations regarding cannabis cultivation differ from country to country. Sensi Seeds therefore strongly advises you to check your local laws and regulations. Do not act in conflict with the law.
22 thoughts on “How to Germinate Cannabis Seeds”
Hi, Once seeds have sprouted, how long can or should you leave them to grow under 24 hr lights before moving to your outdoor garden?
Good afternoon Ken,
I hope you’re having a great day.
For the vegetation process, a light schedule of 18 hours of light, and 6 hours of darkness is preferred. Many growers get plants acclimatized to outside by placing them in a window, or under direct sunlight for a few hours a day.
Thanks again, and have a great day!
Hello everyone, all these suggestions are wonderful but I think a lot of you make it sound a little overwhelmingly. I’ve been very successfully cultivating for decades and I’ve always just placed my seeds, be it 1 or 100, in between 2 folded sheets of tissue which I’ve made wet with tap water. I then place them on a tray or plate in a warm dark area , such as an airing cupboard and leave for how ever long they take usually, 12 to 24 hours. The ONLY thing I do which takes effort is PH balance the water I germinate them in and I’ve only lost 5 seeds in nearly 40 years .
Good afternoon Paul,
I hope you’re having a good day,
Thanks for sharing your experiences with germination. pH balancing is a great tip You also might be interested in our new Jamaican Pearl Feminized Grow Report
Thanks again, and I hope you continue to enjoy the blog,
I lightly score my seeds by shaking them inside a rolled up piece of sandpaper – sandpaper side on the inside before leaving them in a cup of water for a few hours to hydrate. I then place them between wet (good quality) paper towel per instructions above. I find using an old plastic takeaway container with a heatmat below keeps the humidity high and with good end results.
Good morning Jonny,
Thanks for sharing your methods for germination with us, the heat mat and low-humidity are great tips!
Thanks again, and I hope you continue to enjoy the blog,
I have found out that the best and fastest way is to take a glass of clean/filtered water and place the seed right on top of the water (floating – NOT immersed in it!). If the seed is viable it will sprout in no more than 48 hours. Right after that you plant it in your pot/soil etc and you’re done.
Good morning Mary Jane,
Thanks for your support, and for sharing your experiences with germination!
You might also be interested in our article on The Life cycle of Cannabis: From seed to harvest.
Have a great day!
What happend if they sink I had em sink they came out fine
Are you saying they sprout in the glass of water and don’t “drown”?
Take aluminum foil flatten it out and put on top of your dirt it detects planes and grow it just like a tomato plant
Good morning Tammy,
Thanks for getting in touch with Sensi Seeds, and sharing your germination method with us!
Thanks again, and I hope you continue to enjoy the blog.
With best wishes,
Detects planes? Like magnetic? I’ve always has best success 24-48 hours soaked In water, spring water if possible. Usually do this in a shot glass, once they pop I’ll take a paper towel fold so it’s 2 layers then fold once more so you know where center is. Dump the seed in the middle of the edge and the true center (reason we folded a 2nd time)as well as the water just enough to saturate the paper towel. Do not soak! Carefully with the seed in the middle using sterile tweezers turn so the tap is growing down. This will prevent circling and tangling if doing multiple seeds. Now you can fold the other half so your seed will be “sandwiched” between 2 layers. At this time carefully take a corner and the waters attraction should keep your paper towel from unfolding but just in case be gentle. Holding it from 1 corner you can dangle it over a cub or the original shot glass so any extra water runs off. Now take a standard zip or press n seal sandwhich bag and slide your napkin in Carefully . REMEMBER which way was down! Work the air out making jt flat snd seal. Find a temperate dark area around 70°. A cabinet works we’ll as your going to prop it up with taproot facing downwards. Now just close it up and wait in 24-72 hours checking once a day. In rare cases you could have a 1/2″ tap root in the first 24 hrs some may take 4-5 days. Once the tap is about 1/2″-3/4″ long its ready for transplant into its first small pot. With this paper towel method I typically have 100% success.
Can you leave your seed to develop longer roots in the germination phase and can this make them better to grow or is a big no no?
Last year, I had 2 seeds that had really long roots with lots of secondary roots coming out when they were planted, one of which died after a couple of weeks and the other grew into a huge plant.
The other two seeds only had a short germinated growth and both died almost immediately after planting so not sure what I can learn from this…lol
Appreciate any thoughts and advice
Unfortunately, legal restrictions mean we can’t answer grow-related questions or give grow advice on this blog. However, other readers of this blog will often answer questions like yours.
Please check out the following articles on our blog which I think you may find of use, and I hope you continue to enjoy the blog!
With best wishes,
How often do you water and how wet should the plant be? Please.
Also if they are outdoor plants do you need to keep them covered with clingfilm for a wee while or do you just hope for the best. Thanks
This article, about how to water cannabis plants, should answer your questions. I can’t help you with the clingfilm one though, as it depends on the climate. Good luck, and happy gardening!
With best wishes,
Just drop the seeds in water, they will sprout , don’t have to use a towel and check it all the time , drop it in the water , let it float then it will sink and the root will grow out ,let the root get 1/4 inch and plant it where it’s going to grow , 8 hours sunlight starting as soon as it is out of the soil. Always grows great , don’t have to transplant from cup to gallon to bigger and bigger , if it’s growing outside put it where it stays , always does just fine.
Good afternoon Graham,
Thank you so much for sharing your experiences with germination.
Thanks again for your comment, and I hope you continue to enjoy the blog.
Have a great day!
I recommend this article to all breeders and cultivators who plans to germinate seeds and to some who don’t know how to germinate seeds, this article has the best and perfect ways on how to do it.
I have large bay windows at my condo which get about 11-12 hours of light per day. They are tinted but warm. I grow other indoor plants there perfectly. Is an ok place for my pot plants?
This sounds like a great place for all kinds of plants! I recommend you have a look at autoflowering varieties, as otherwise light pollution may negatively affect the flowering cycle. Good luck, and happy gardening!
With best wishes,
Leave a Comment Cancel Reply
The Sensi Seeds Editorial team has been built throughout our more than 30 years of existence. Our writers and editors include botanists, medical and legal experts as well as renown activists the world over including Lester Grinspoon, Micha Knodt, Robert Connell Clarke, Maurice Veldman, Sebastian Maríncolo, James Burton and Seshata.
Cannabis seeds 101: How to grow marijuana from seed
Cannabis is grown from one of two sources: a seed or a clone. Seeds carry genetic information from two parent plants and can express many different combinations of traits: some from the mother, some from the father, and some traits from both.
In commercial cannabis production, generally, growers will plant many seeds of one strain and choose the best plant. They will then take clones from that individual plant, which allows for consistent genetics for mass production.
If cannabis is legal in your state, you can buy seeds or clones from a local dispensary, or online through various seed banks.
Cannabis seeds vs. clones
For the typical homegrower, it may be easier to obtain cannabis seeds rather than clones. Growing from seed can produce a stronger plant with more solid genetics.
Plants grown from seed can be more hearty as young plants when compared to clones, mainly because seeds have a strong taproot. You can plant seeds directly into an outdoor garden in early spring, even in cool, wet climates.
If growing outside, some growers prefer to germinate seeds inside because they are delicate in the beginning stages of growth. Indoors, you can give weed seedlings supplemental light to help them along, and then transplant them outside when big enough.
Most seeds that you will buy are regular seeds as described above, but here are a couple more types.
How weed seeds work
Cannabis can be either male or female—also called “dioecious”—but only females produce the buds we all know and love. For reproduction, males have pollen sacs and pollinate females, causing female flowers to produce seeds.
Once cannabis seeds are mature, the female plant begins to die, and seeds are either dropped to the ground where they grow into new cannabis plants next spring, or the seeds are harvested for processing into seed oil or food products, or stored so they can be sown in the ground later and become the next generation of plants.
To get the buds found in medical and recreational stores, female cannabis plants are grown in an environment without males—or the males are removed from the area before they release pollen—so the females don’t create seeds. Females can then focus their energies on producing buds and not seeds—this high-potency marijuana is traditionally known as “sinsemilla,” meaning “seedless.”
Some varieties of cannabis can produce male parts alongside female flowers on the same plant, especially if exposed to environmental stressors. These plants are known as hermaphrodites, and sometimes they can self-pollinate to create seeds.
Pros and cons of using cannabis seeds
Check out Johanna’s full video series on how to grow weed on Leafly’s YouTube .
If buying from a reputable breeder or seed bank, growing from seed is the best way to ensure your plants will have solid genetics and start clean, meaning they won’t come with diseases or pests.
Also, buying from a reputable breeder or seed bank will give you a sense of what a particular strain will look and smell like, how it will grow, and how much it will yield at harvest.
The main drawback to growing from seed is there is no guarantee as to what you’ll end up with—if you buy a regular pack of cannabis seeds, it will be a mix of males and females. You’ll need to sex them out (more below) to identify the males and get rid of them, because you don’t want your females producing seeds.
Sexing marijuana plants can be a time-consuming process, and if you don’t catch males, there is a risk that even one males can pollinate your entire crop, causing all of your female weed plants to produce seeds.
One way to avoid sexing plants is to buy feminized seeds (more below), which ensures every seed you plant will be a bud-producing female.
You can also minimize headaches and avoid the hassle of seed germination and sexing plants by starting with clones.
How weed clones work
Aside from producing cannabis through seeds, or sexual reproduction, you can also reproduce the plant through cloning, or asexual reproduction. A clone is a cutting that is genetically identical to the plant it was taken from—that plant is known as the “mother.”
Pros and cons of using cannabis clones
Through cloning, you can create a new harvest with exact replicas of your favorite plant. Because genetics are identical, a clone will give you a plant with the same characteristics as the mother, such as flavor, cannabinoid profile, yield, grow time, etc. So if you come across a specific strain or phenotype you really like, you might want to clone it to reproduce more buds that have the same effects and characteristics.
With cloning, you don’t have to get new seeds every time you want to grow another plant—you just take a cutting of the old plant—and you don’t have to germinate seeds or sex them out and get rid of the males.
One drawback of clones is they need to be taken during the vegetative stage of a plant—flower is too late—so if you have a small setup with only one light, it can be hard to keep clones alive while flowering other plants, because the two need different amounts of light.
Another drawback to clones is they can take on negative traits from the mother plant as well. If the mother has a disease, attracts pests, or grows weak branches, its clones will probably have the same issues.
Additionally, every long-time grower will tell you that clones degrade over time.
What are feminized cannabis seeds?
Feminized cannabis seeds will produce only female plants for getting buds, so there is no need to remove males or worry about female plants getting pollinated. Feminized seeds are produced by causing the monoecious condition in a female cannabis plant—the resulting seeds are nearly identical to the self-pollinated female parent, as only one set of genes is present.
This is sometimes referred to as “cloning by seed” and will not produce any male plants. This is achieved through several methods:
- By spraying the plant with a solution of colloidal silver, a liquid containing tiny particles of silver
- Through a method known as rodelization, in which a female plant pushed past maturity can pollinate another female
- Spraying seeds with gibberellic acid, a hormone that triggers germination (this is much less common)
Most experienced or commercial growers will not use feminized seeds because they only contain one set of genes, and these should never be used for breeding purposes. However, a lot of beginning growers start with feminized seeds because they eliminate the worry of having to deal with male plants.
Top feminized cannabis strain families
A lot of classic weed strains that have been around for a while come in feminized form. Some popular fem seeds are:
- OG Kush
- GSC (Cookies)
What are autoflowering cannabis seeds?
Autoflowering seeds are also popular with beginning growers. They are easy to grow because you don’t have to worry about light cycles and how much light a plant receives.
Most cannabis plants begin flowering when the amount of light they receive on a daily basis reduces. Outdoors, this happens when the sun starts setting earlier in the day as the season turns from summer to autumn. Indoor growers can control when a plant flowers by reducing the daily amount of light plants receive from 18 hours to 12 hours.
However, a type of cannabis called Cannabis ruderalis, which developed in extreme northern conditions without much sunlight, will begin flowering once the plant reaches a certain age—they automatically start flowering regardless of the amount of light they receive, hence the name “autoflower.”
Pros and cons of growing autoflower
Because they grow and flower quicker, growers can fit in multiple autoflower cannabis harvests into the span of one regular harvest.
Autoflowers can be started in early spring and will flower during the longest days of summer, taking advantage of high quality light to get bigger yields. Or, if you get a late start in the growing season, you can start autoflowers in May or June and harvest in the fall.
Also, autoflower plants are small—perfect for closet grows or any small grow, or growing outdoors where you don’t want your neighbors to see what you’re up to.
A couple big drawbacks, though: Autoflower strains are known for being less potent. Also, because they are small in stature, they usually don’t produce big yields.
However, potency in autoflowering varieties has increased significantly since their initial introduction, with some breeders crossbreeding the low-THC ruderalis with other more potent varieties.
Tips for growing autoflower marijuana seeds
Autoflowering strains require some preparation, as they will grow quickly and start to flower whether or not you’re ready for them.
Many marijuana growers start autoflowers early in the season, and at a different time than a regular crop, so keep the season and climate in mind when growing and harvesting—your plants still need warmth to grow, and rain can give them bud rot. Consider growing in a greenhouse to protect them.
Because training happens during vegetative growth, for autoflowering plants, this period could be as short as a few weeks, which means time is limited. Try topping your autoflowers after they have three nodes, and stop once they begin to flower. You will want to prune them lightly.
Go easy on nutrients
Autoflowers don’t need lots of nutrients because they’re small and don’t spend much time in the vegetative cycle. They won’t need as much veg nutrients—such as nitrogen—but will need more bloom nutrients.
What are high-CBD cannabis seeds?
CBD, or cannabidiol, is one of the chemical components—known collectively as cannabinoids—found in the cannabis plant. Over the years, humans have selected plants for high-THC content, making cannabis with high levels of CBD rare. The genetic pathways through which THC is synthesized by the plant are different than those for CBD production.
Cannabis used for hemp production has been selected for other traits, including a low THC content, so as to comply with the 2018 Farm Bill. Consequently, many varieties of hemp produce significant quantities of CBD.
As interest in CBD as a medicine has grown, many breeders have crossed high-CBD hemp with cannabis. These strains have little or no THC, 1:1 ratios of THC and CBD, or some have a high-THC content along with significant amounts of CBD (3% or more).
Seeds for these varieties are now widely available online and through dispensaries. It should be noted, however, that any plant grown from these seeds is not guaranteed to produce high levels of CBD, as it takes many years to create a seed line that produces consistent results. A grower looking to produce cannabis with a certain THC to CBD ratio will need to grow from a tested and proven clone or seed.
How to germinate marijuana seeds
Germination is the process in which a seed sprouts and begins to grow into a new plant. Also referred to as “popping,” germination is the very first step in starting your weed grow.
Marijuana seeds can be acquired from an array of sources and can vary in quality. For more info on how to buy marijuana seeds, check out our Guide to buying cannabis seeds.
Cannabis seeds require three things to germinate: water, heat, and air. There are many methods to germinate seeds, but for the most common and simplest method, you will need:
- Two clean plates
- Four paper towels
- Distilled water
Take four sheets of paper towels and soak them with distilled water. The towels should be soaked but shouldn’t have excess water running off.
Take two of the paper towels and place them on a plate. Then, place the marijuana seeds at least an inch apart from each other and cover them with the remaining two water-soaked paper towels.
To create a dark, protected space, take another plate and flip it over to cover the seeds, like a dome.
Make sure the area the seeds are in is warm, somewhere between 70-85°F.
After completing these steps, it’s time to wait. Check the paper towels once a day to make sure they’re still saturated, and if they are losing moisture, apply more water to keep the seeds happy.
Some seeds germinate very rapidly while others can take a while, but generally, seeds should germinate in 3-10 days. If it’s been two weeks and a seed hasn’t sprouted, it’s probably a dud and won’t sprout.
A seed has germinated once the seed splits and a single sprout appears. The sprout is the taproot, which will become the main stem of the plant, and seeing it is a sign of successful germination.
It’s important to keep the delicate seed sterile, so don’t touch the seed or taproot as it begins to split.
Transplanting germinated cannabis seeds
Once you see the taproot, it’s time to transfer your germinated seed into its growing medium, such as soil.
- Fill a 4-inch or one-gallon pot with loose, airy potting soil
- Water the soil before you put the seed in; it should be wet but not drenched
- Poke a hole in the soil with a pen or pencil—the rule of thumb is: make the hole twice as deep as the seed is wide
- Using a pair of tweezers, gently place the seed in the hole with the taproot facing down
- Lightly cover it with soil
Keep a close eye on the temperature and moisture level of the soil to keep the seed happy. It’s very delicate at this stage. Use a spray bottle to water it—over-watering can suffocate and kill the delicate sprout.
Within a week or so you should see a seedling begin to grow from the soil.
Germinating cannabis seeds doesn’t always go as planned. Some seeds will be duds. Others will be slow and take longer to sprout. But some will pop quickly and grow rapidly.
This is the beauty of seeds—often, you can tell which plants or genetics will thrive right from the get-go. This will help you determine which plants you want to take cuttings from for clones or for breeding if you want to create a seed bank of your own.
How to sex a pot plant
Check out Johanna’s full video series on how to grow weed on Leafly’s YouTube .
As we’ve mentioned, cannabis is a dioecious plant, meaning male and female reproductive organs appear on different plants.
Because only female cannabis plants produce buds and you want them to focus all their energy on producing buds and not seeds, it’s important to identify and get rid of male weed plants so they don’t pollinate females. If females are pollinated, it will give you buds filled with seeds, making your weed harsh and unpleasant.
Cultivating males is important for breeders trying to cross new strains and genetics, but most people growing for buds will want to remove the males.
As mentioned above, you can skip the processing of sexing weed plants by growing with feminized seeds or clones.
If growing male and female cannabis seeds, they’ll start to show their sex organs, or “pre-flowers,” after 8-10 weeks from germination.
Cannabis plant sex organs appear on nodes, the points where branches grow off from the main stalk.
Males will have round balls—these will develop into pollen sacs, which will release pollen into the air when mature.
Females will have a round structure with long hairs—these hairs will develop into pistils, which will catch pollen in the air.
Pre-flowers can initially be extremely small and hard to identify with the naked eye, but you can use a magnifying glass to get a better look.
Can I grow a seed I found in a bag of weed?
Finding a cannabis seed in your stash is not ideal, but we’ve all been there before. Although much less common than it once was, it still happens. Sometimes you’ll notice one when grinding down some flower, or you’ll see one pop, spark, and crackle from the heat of a lit bowl.
These are referred to as “bagseeds” and whether or not you can grow one will depend on where it came from.
Is a bagseed good or bad?
Seeds found in finished cannabis buds can develop for a number of reasons. For example, a male plant may have accidentally pollinated a flowering female during the growing process. But more commonly, they’re a sign of stress and can be attributed to high temperatures during the final stages of flowering or an exaggerated spike in climate or environment.
Seeds can also form in plants with genetic disorders or instability, like hermaphrodites—plants that develop both male and female reproductive parts. Generally, stress and genetic disorders are viewed as bad, so temper expectations with any plant you start from a bagseed.
But sometimes you get lucky and find a mature seed in some really nice herb. Strains like the legendary Chemdog wouldn’t be possible without adventurous smokers planting and proliferating the seeds they found in a bag of kind bud.
So don’t discount bud because it has a seed or two in it. While not ideal, it could be the origins of the next great weed strain.
Ask yourself a few questions to decide if it’s worth the time and energy to grow the seed.
Was the seed found in good weed?
If you don’t like the flavor, effects, or even the look of the bud, then it’s probably not worth growing.
Are you ready to grow?
Growing marijuana takes a certain level of commitment: time, energy, and financial resources, so be sure you can commit to the whole process.
Is the seed viable?
For a seed to be viable, it must be mature enough to have a completely formed genetic blueprint, and it must be strong enough to germinate and pop through its hard casing and sprout its crucial taproot.
There are a few indicators that will give you a sense of whether the seed is worth germinating.
- Tiger stripes—dark stripes on the seed which resemble veins on a leaf are generally good
- Solid shell—a seed should be able to withstand a little pressure when pinched between your fingers; if it crumbles or cracks, it’s no good
Immature seeds tend to be light in color and have a soft outer shell.
In some cases, even if a seed isn’t completely mature, there’s still a chance it could be viable. But often these are extremely weak, take long to develop, and express other unfavorable characteristics. Growers usually discard weak plants to free up space.
You might also find a mature seed that has been physically damaged through poor handling, like rough trimming. In those cases, it probably isn’t worth the effort to try and germinate the seed.
But if the seed you found looks decent, you might as well germinate it and see what sprouts.
Time to germinate
Viable or not, there’s only one sure way to find out if a bagseed will grow. If you’re simply curious to learn and not as concerned with the overall outcome, you can plant a couple of bagseeds outside and see what happens.
If you’re ready for a more serious approach, make sure you have the space for a proper garden and pop the seeds to see what fruit they bear.
Even if your seed sprouts fast and grows vigorously, it still has roughly a 50/50 chance of being female and producing buds, instead of turning out to be a male.
Remember, once a seed germinates, the real work begins. Sexing, selecting, vegetative growth, flowering, and the eventual harvest all lie ahead.
How to buy cannabis seeds
Cannabis seeds can be found on numerous online seed banks, but note that it is illegal to bring seeds into the US and Customs will seize any cannabis seeds that they find in packages or on a person. In legal and medical states, you may purchase seeds at a dispensary.
Spotlight: The 3 Best Ways to Germinate Cannabis Seeds
Does cultivating cannabis seeds interest you? Do you want help with it? This piece will discuss the best ways you can opt for when germinating your cannabis seeds.
Courtesy Photo / Samuel Mind
Have you recently decided to germinate your own cannabis seeds? It is a very exciting and rewarding process, only if you know the right way to do it. For that, we have come with a complete guide that will help you germinate cannabis seeds in the best way possible.
What exactly is Germination?
Germination is the very first stage of any plant growth. It is when the seed “realizes” that it is in a fertile environment and can start breaking out of its shell. A seedling will break through the shell, resulting in the growth of roots. The fertile environment helps the plant grow and feed off the light, water and nutrients in the environment. In the cannabis world, germination is a very important process. It is very important for the seed to pop out properly. There are different things that cultivators do to ensure that the seed germinates successfully.
How to Germinate Cannabis Seeds
There are different methods that cultivators use to germinate their cannabis seeds. Some use the old school method and germinate their seeds in the soil, while there are some people who germinate them in water. Lastly, you can also find people who germinate their seeds in paper towels. The way of cultivation depends on the cultivator. Let us take a closer look at each of these methods.
Germination of Cannabis Seeds in Soil
Soil is the most natural method to germinate your cannabis seeds. The soil is the perfect environment for the germination of cannabis seeds as the soils protects the weak roots from being damaged. However, there are things that you must take care of. For instance, it is very important to use the right type of soil.
Premiere: Chris Liebing – 10 West (Anfisa Letyago Remix)
Point Blank Music Futures @ fabric: Industry Panel Highlights
Spotlight Premiere – Mikas’ Perception EP On Progressive Grooves Records
You can go for potting soil that is only lightly fertilized or you can also go for a seed starter that has a pH level 6 or slightly more acidic. The acidity in the soil is the optimal environment for the growth of the seed. Be careful, excess of everything is bad, and “hot soils” that are very rich in nutrients aren’t suitable for germination and seedlings – leave this type of medium for mature plants.
Germination of Cannabis Seeds in Water
If you want your plant to grow faster, germinating your seeds in water will probably be the best way forward. However, even though it is faster, there are things that you need to be careful with. You will have to make sure that the environment is of the optimal condition. Usually, to germinate, cannabis seeds need only a total of 24 to 48 hours. However, cultivators can keep their seeds soaked for a week. This method is faster than the soil method as it provides more moisture. Moisture is a key component in growing the seeds. The hard shell cannot withstand the moisture and it will become easier for the root to break through.
Germination of Cannabis Seeds in Paper Towels
Paper towels are a fairly new way for cultivators to germinate their seeds. Cultivators use damp paper towels or cotton pads to give the seed the moisture it needs. The seeds are placed in between two dampened paper towels and then enclosed between two plates. This helps keep the moisture in seeds need to be stored inside, under room temperature.
The germination process in this method takes up to 5 days to happen. The seeds will start sprouting in the paper towels and once the roots grow up to 5 millimeters in length, you can plant them. However, you must be very careful when planting them. They can easily break, as the roots are very fragile. It is possible for the roots to be tangled in the paper towels and break off. This is why it is best if you are extra gentle when handling them – the best way is to use a pair of sterile tweezers.
These are three ways you can germinate your cannabis seeds. The question remains as to which of these ways is the best. That depends solely on the cultivator. They need to decide what method works best for them and is the easiest to carry out. As our experience shows, more and more growers tend to use paper towel method, as it is simple, keeps the seed away from light, and usually results in quick germination. Also remember, that it is best to germinate the seeds and keep the young seedlings indoors as you can control the environment.
If you want to buy the highest quality of seeds, you can always do it at Herbies Seeds. They have some of the best seeds across the world with the guarantee of germination. The seeds they offer are authentic and high quality. If you want to give cannabis cultivation a go, it is best to get the seeds from a reputable place.