How to clean seeds from weed

Cleaning Weed Seeds from a Combine – Video

Equipment that enters a field with mature herbicide-resistant weeds will easily become a vector for the spread of those weed seeds to other fields. Using proper precautions and thoroughly cleaning equipment after working in weed-infested fields can greatly reduce the spread of weed seeds to the next field.

Combines are a common cause of the introduction of herbicide resistant weeds to new fields. They’re a primary mode of weed seed spread across regions of the US including the Midwest, South, and mid-Atlantic. Things that make them a vector are: they process all plants within a field, including weeds, during a time of the year when remaining mature weeds are producing viable seed; there are many small spaces within a combine where weed seeds might hide; they are time-consuming to clean.

Other pieces such as tillage equipment and tractors have also been found to carry weed seed from field to field if they are used when plants have matured and produced seed.

Because many problematic resistant weed species can produce between 50,000-1 million seeds per plant, even the spread of a few seeds can cause a serious and costly infestation within a couple of seasons.

General Tips for Preventing Weed Seed Spread with Equipment Maintenance:

1) Harvest herbicide-resistant weed-infested fields last.

2) Know whether the combine entering the field has recently been in a field containing herbicide-resistant weeds such as waterhemp or Palmer Amaranth. If so, take the time needed to clean it or consider other available options.

3) When purchasing a used combine, take the necessary time to completely clean the combine before use.

4) Utilize an air compressor to remove the bulk of the weed seeds from the combine.

5) Check the rock trap, as weed seeds and debris may be caught here. Drop the rock trap and blow it out with the air compressor between fields.

6) Open trapdoors to clean the grain auger and tailings processor with an air compressor.

7) On a rainy day, consider a thorough 4-5 hour combine cleaning as a rainy day activity.

8) Since weed seeds can also travel on tillage equipment, clean this equipment after infested fields as well.

Share this:

More News & Updates

How to Get Rid Of Weeds with multiple tactic layers

Dr. Ramon Leon, North Carolina State University Extension and Research Weed Scientist, discusses how to manage winter and summer.

GROW, Getting Rid of Weeds Through Integrated Weed Management, Objectives and Platforms

GETTING RID OF WEEDS stands as OUR BRAND NAME for the USDA-ARS AREA-WIDE FUNDED INTEGRATED WEED MANAGEMENT TEAM. We have.

Bayer CropScience and USDA Collaborate To Promote On-The-Farm Integrated Weed Management

USDA’s Agricultural Research Service-sponsored GROW network (www.growiwm.org) is pleased to collaborate with Bayer CropScience.

Join the GROW community to receive information on IWM strategies that really work, right to your inbox.

Bill Mason and family, who runs an organic farm in Centreville, MD, are #plantinggreen after #covercropping a mixture of cereal rye and crimson clover.

The Straw Bale Methodology for Cleaning Weed Seeds Out of a Combine

In this video we describe how to deep-clean your combine from weed seeds with the use of straw bales.

W e often see weeds visible above a cash crop canopy, particularly in soybean fields. Sometimes these weeds are solitary specimens, while other times they are distributed in patches or even rows. Farmers have told us that these weed species are new to their fields and may have been carried into the fields by a combine. It is a plausible scenario: combines have been documented to spread weed seeds from infested fields to new fields. Weed seeds can survive in debris on a combine across seasons.

Most people think that weed seeds are hidden somewhere in the combine and that is almost impossible to remove, even during a thorough cleaning-up. This is not true. It is both crucial and possible to deep-clean the combine before moving to another field, as well as at the end of the season.

A soybean combine works by cutting off both soybeans and weeds near ground level and bringing the material into the header. All the material then feeds into the threshing cylinder. While grain is collected in a bin, straw and chaff are dropped behind the combine as it moves along the field.

Moving from the rear of the combine to the header, straw chopper knives, walker cranks, and straw walkers can allow residue to accumulate. Weed seeds get stuck in the straw chopper and chaff spreader as well as in the unloading auger. To reach many of those parts, the different access gates on the sides of the combine should be opened. Cylinder and concave are composed of many parts where weed seeds easily hide. Since they are difficult to access they should be cleaned with compressed air whenever possible.

Sieves, tailing return chains, drives, tank auger, and transmission are also important parts that must be considered in the cleaning process.

Plant residues containing weed seeds can be removed by opening the stone trapdoor.

Start cleaning a combine from the top and from the header to the rear, following the normal circulation of the material. Certain parts are better cleaned with an air compressor, while others could be done with a leaf blower. Cleaning the grain bin and augers as well as the moisture sensor is essential to prevent wagon and truck contamination with weed seeds.

After the combine is cleaned with a blower or compressed air, let the fans work until no more residue is coming out the back. A tarp could be helpful to see when that happens.

The last step is to introduce hay through the header and a combination of hay and wood pellets to the grain bin. Be sure to take the bale pieces apart and feed them into the machine from either the feeding house opening or the header. Depending on how big the combine is, it will take from two to three bales to clean it. With the engine, fans, and all threshing components at normal operating speed and the header turned on, carefully feed bales from the sides of the header to the middle. To clean the grain bin, be sure the auger is not running, mix 25 pounds of wood pellets with half a bale, and introduce the mixture into the grain tank auger. Then start operating the auger to clean it. Straw fed into a combine after harvest, as opposed to straw as part of the harvest (grain + straw + chaff), moves around the combine more freely to reach those spots containing hidden weed seeds.

Once the bales have entered the machine, watch the rear of the combine to see when no more material comes out. When that happens, a final, cosmetic cleaning step with the help of a blower may be necessary to remove a few large pieces of straw which might be stuck in different parts of the combine.

Results From Three Combines (pdf)

Prior to storing combines at the end of the season, three previously cleaned combines were tested for weed seed retention. Initially combines were run until no residue fell on the tarp used to collect the weed seeds, then straw bales and wood chips were fed through the combine in an attempt to catch and remove any remaining weed seed.

Research has shown the straw bale cleaning method to be effective.

After running this test from a first combine, weed seeds were identified and counted. Over 3,000 Palmer amaranth seeds along with other weed seeds were collected. A second combine cleaning resulted in more than 1,700,000 Palmer amaranth seeds collected in total over 3,5 million weed seeds were removed from this cleaning. The third combine received a thorough cleaning and resulted in no weed seed retention.

Combines have been designed for harvesting crops, separating grains from stems and pods, and cleaning the grain of unwanted material. Unfortunately, they are not designed for weed seed self-cleaning. Consequently, the machine must be carefully cleaned, keeping in mind where weed seeds can hide. The time it takes to deep-clean a combine to remove weed seeds could range from minutes to hours, depending on how often the combine is cleaned and how weedy the fields are. Remember that prevention is the key to managing weed seed dispersal, and combine cleaning is a major part of prevention.