When To Harvest Marijuana Seeds?
After the whole process of germination, growth and flowering, a lot of growers ask themselves when to harvest Marijuana seeds. Usually, the breeders will include a suggested flowering time for each strain, but as a rule of thumb, Indica marijuana plants harvest in 6-8 weeks while Sativa Marijuana plants take 10-12 weeks.
Look for these signs for when to harvest Marijuana seeds
You can also judge the ripeness of the Marijuana by taking a look at the trichomes; or little hairs/crystals on the flowers and surrounding areas of the Marijuana plant. If they are transparent its still too soon, if they are milky white they are ready and if they turn brown they have become over-ripe. It is also advisable to follow the instructions to harvest Marijuana seeds on the packet since most reputable breeders also have a tried and tested flowering time for optimum ripeness, potency and flavour of a Marijuana strain.
If you meant when to harvest seeds from cross-pollinated Marijuana plants, then the seed will fall from the flower by itself once it is mature and ready to germinate into another Marijuana plant. Usually, as a best practice to harvest Marijuana seeds, some growers wait for the whole flowering cycle to end just as if they were harvesting the flower.
You might find our FAQ Submission How Do I Harvest My Plant? useful
Preserving Cannabis Genetics: How to Collect and Store Seeds and Pollen
Sometimes a grower has to move on from a certain strain. Maybe you’ve been growing the same strain for a long time and it no longer makes as much money as it used to, or maybe you just want to mix it up and start growing something else and don’t have the space for it.
It can be bittersweet saying goodbye to old genetics, but sometimes it’s unavoidable. You can take clones or keep a mother plant, but those aren’t ideal because they require a lot of care and maintenance, especially if they aren’t producing flower.
Fortunately, preserving genetics for long-term storage is easy and will save time, money, and space in the long run. Through seed and pollen collection, you can hang onto those genetics that you can’t fully get rid of and safely store them for future use.
The Benefits of Long-Term Storage
Cannabis genetics are often sourced from external companies and organizations such as nurseries and seed banks. For the individual grower, saving seeds and pollen removes this reliance on external companies. This is especially true with pollen, as very few (if any) companies offer pollen to the public.
Saving space is a big reason to consider long-term storage of seeds and pollen. Mother plants lay dormant in a vegetative state and take up lots of space. Maintaining this extra space is time-consuming and takes extra resources like water, soil, nutrients, light, and other costly elements, all for something that doesn’t produce flower. Even keeping clones of an old strain around will take up space and resources.
A grower or breeder can also freeze the progress of a breeding project for months or years without losing any of the long, hard work. Endeavors such as phenotype hunting and maintaining desired mothers for breeding and cloning can all be saved for later through genetic preservation. This process is like backing up work on a hard drive.
How to Collect Seeds
Cannabis is for the most part dioecious, meaning that the male and female reproductive organs exist on two separate plants (although hermaphroditic plants do occur). It is also a wind-pollinated plant, so pollen must be transferred from a male stamen to a female pistil via the air in order for pollination to occur and seeds to form.
A female cannabis plant that has received pollen from a male will produce many seeds over the course of its maturation cycle. Upon senescence, when the female plant is fully mature and ready for harvest, its seeds will be ready for stratification and collection.
To collect seeds, it’s important to wait until they are fully mature and ready for harvest. Cannabis with seeds takes longer to mature than cannabis that only produces flower.
To tell if a seed is mature, take a look at its shape and color. Premature seeds will be small and light in color, taking on a beige hue. Fully mature cannabis seeds are more full in shape and size and have a much darker brown hue, sometimes accented by black tiger stripes.
Deseeding cannabis can be done by hand or machine. This process typically takes place after the plant has been dried for one to two weeks after harvest. This way, seeds will have reached their maximum maturity and plant material will be brittle enough to break apart with minimal effort.
When collecting seed by hand, use a fine screen to help catch trichomes that will break off during the process. This material is valuable and it would be a shame to waste.
To release the seeds, simply break up the dried buds over a screen and they will fall out. You can release the seeds en masse by rubbing the flower between your fingers and lightly breaking it apart.
Separate or sift seeds over the screen to remove any unwanted plant matter from the seeds themselves. Brush off the seeds—they should be completely free of any remaining plant material such as leaves, stem, or trichomes, as these elements put seeds at a higher risk for contamination and spoilage during long-term storage.
Male cannabis plants will produce pollen several weeks into their flowering cycle. Once their pollen sacs have opened up and released, the plant will begin to senesce and eventually die. It is important to collect pollen right as the sacs are beginning to open up, as this is the time pollen is most viable.
The best way to harvest pollen for storage is to remove an entire male flower cluster and place it in a sealed storage container for several days. After the cluster has dried, place it over a micron screen with parchment or wax paper underneath, and give it a light shake. This will allow the pollen to separate from any remaining plant matter and fall through the screen and onto the wax paper.
Moisture is a death sentence for pollen viability. Because of this, many breeders opt to mix flour into their pollen at a ratio of 4:1 (flour to pollen) when storing it long-term. This additional step will help keep pollen dry for a longer period of time.
Seed and Pollen Storage
Long-term storage requirements for seeds and pollen are similar. Both require cool, dark, dry, and oxygen-deprived environments for optimal preservation.
When storing seeds, place them in an air-sealed container that doesn’t have any light leaks. Film canisters, medicine bottles (non-translucent), and any sealable storage jar will work fine. The idea is to reduce the amount of oxygen present in the storage space as much as possible. You can also add uncooked rice to the storage container, which acts as an absorbent, to reduce moisture content.
For a cool environment, store seeds in either the refrigerator or freezer. Seeds need a consistent temperature without fluctuation to remain dormant long-term.
As mentioned above, the best way to reduce moisture in pollen is to mix it with flour. For long-term storage, it can be kept in a sealed vial or freezer bag. You can keep it in the refrigerator or freezer, though for optimal long-term storage, the colder the better.
The Shelf Life of Seeds and Pollen
You can expect cannabis seeds that have been sealed and properly stored to last for several years, and in many cases, longer. Seeds may be dormant, but they are still alive. Over enough time, they will lose their viability.
It’s important to continually practice germination testing to be sure your stored seeds haven’t lost all viability. To test this, periodically plant a seed and document its ability to germinate.
Fresh seeds should have a germination rate close to a 100%, whereas older seeds will see a significant drop off over time in their ability to germinate.
Out in the open, pollen may be viable for one or two weeks under normal conditions. However, when frozen and sealed, it can last up to a year and even longer. Pollen is more unstable than seed and even under the most optimal conditions, it isn’t expected to have as long of a shelf life.
For both seeds and pollen that have been frozen long-term, it’s important to avoid defrosting until they are ready to be used. Fluctuations in temperature and moisture content will quickly destroy their viability, so maintain a steady temperature for as long as possible. Warming and freezing multiple times isn’t good.
When it comes time to use frozen seeds, remove them from their container and let them sit out on a dry surface for several hours. Letting the seeds reach room temperature will help ensure a successful germination.
Pollen should also be placed at room temperature before using. Since pollen can be much messier to handle, it’s best to carefully transfer a sample from its long-term storage container to a fresh container before using it to pollinate a plant. This way, you don’t have to use all of the pollen and saved pollen can go back in the freezer with minimal exposure to warm air.
Harvest Weed Seed Control
At harvest time, weeds that have escaped season long management often have mature seed still attached to the parent plants. These weed seeds can enter the combine along with the cash crop, exit the back of the combine as chaff (small plant pieces and weed seeds), and be spread across the field, as well as from one field to another. It seems a waste to spend all year spraying weeds with expensive herbicides only to reward the survivors at harvest by spreading their weed seeds out for next year.
An excellent way to stop weeds in their tracks is to collect these weed seeds at harvest and either destroy them or deposit them in a known location where they can be monitored and controlled later. Soybean, wheat, and other crops harvested with a grain header are ideal choices for harvest weed seed control (HWSC). Other crops such as cotton and corn need further equipment development to make HWSC a viable option.
If you are considering adding harvest weed seed control (HWSC) to your weed control program there are excellent resources on the WeedSmart website to help guide you through the initial decisions and the implementation of this important weed control tool.
3 steps to get it working for you
1. Decide which system fits your farm best.
2. Get maximum weed seed into the header.
3. Know how to manage the collected weed seed.
What is Harvest Weed Seed Control?
Choose The Best System For You
Which system is best?
HWSC is being rapidly adopted in Australia and other countries around the world. There are six systems currently being used on Australian farms and they have been initially developed by farmers.
Research has demonstrated that all are very effective weed seedbank management tactics for a range of weed species, achieving over 80 percent control and for some nearly 100 percent.
See HWSC in Action
Over 80% weed control for species that retain seed at harvest
Crop residue management
There are six systems currently used to collect and manage weed seed at harvest. They can be grouped according to the way crop residue is managed: chaff only or chaff + straw.
Chaff carts are a tow-behind unit on the combine that collects the weed seed-laden chaff, which can then be placed into piles that are later either grazed by livestock, burnt, or both and sown through the following season. Chaff carts are often chosen for use on mixed cropping and livestock farms in Australia as the chaff is an excellent livestock feed; however, spreading manure back onto fields can allow for further seed spread.
Chaff lining funnels the chaff and weed seeds into narrow rows behind the combine, where the residue is left to overwinter. The weed seeds are exposed to natural elements that can lead to weed seed decay and predation. Typically a follow-up herbicide application is required. – Chaff lining is usually considered a good entry-level HWSC option.
Chaff decks (chaff tramlining) are similar to chaff lining, but place the chaff in one or both of the combine’s wheel tracks. The added compaction from the wheels can be beneficial in controlled traffic systems.
Impact mills run the chaff through a mill that pulverizes (destroys) the weed seed, which is then spread across the fields. This technology is usually considered the ultimate in HWSC.
CHAFF + STRAW
Bale direct collects all the crop residue directly from the combine and compacts it into large bales suitable for sale.
Narrow windrow burning collects all of the crop chaff and straw residue, and funnels it into narrow rows in the field. These rows are burnt to destroy the weed seed. This method is effective but removes all of the crop residue from the field.
Learn More About Each System in This Research Report
Calculate the cost
While each HWSC tactic is similarly effective in collecting weed seeds , they vary considerably in capital and ownership cost, nutrient removal costs, operational costs, and labor costs. Some HWSC tactics involve the purchase of substantial machinery – such as an impact mill, chaff cart, or chaff deck – but the operational and labor costs might be lower than methods such as narrow windrow burning, which involves low set-up costs but higher nutrient losses and labor costs associated with burning. Chaff lining is often chosen as the best entry-level tactic that requires minimal set-up cost, no additional labor and minimal nutrient loss or redistribution. To calculate the cost of each method for your farm you can use a calculator developed by WeedSmart’s Peter Newman. Download the calculator or learn more @ Calculating the cost of HWSC for your farm.