How to Germinate Cannabis Seeds
Germination is the beginning of your cannabis seeds’ life and is easy to master. At this crucial stage, seeds grow and sprout into young seedlings. The best genetics deserve the best start, and all you need is two plates, some paper towel, and water. Apply the best germination method today and enjoy a great harvest.
1. Germination set-up
Prepare the first plate by lining the inside surface with two to three layers of damp paper towel. Drain excess water from your plate.
Place cannabis seeds on the top surface of the damp paper towel. Approximately three per plate; ensure they are not touching but are evenly spaced apart.
Add only a few layers of damp paper towel on top of the seeds, and let any excess water drain from the plate. Too much water lowers the chance of successful germination.
To complete the set-up, place the remaining plate upside-down and on top of the first plate, resembling pearls inside a clam.
Cannabis seeds need a dark, warm, and humid atmosphere to germinate.
Around 21°C (70°F) is perfect. Check the paper towels every second day and if required, spray with water to keep conditions moist for your seeds.
After a few days, tiny roots will begin to emerge. Congratulations! Your seeds have survived their first stage of life. Don’t worry if some of your seeds have not yet changed, they may just need a little more time as germination can take up to 14 days.
3. Plant of the seeling
Once the roots are a few millimetres long, they are ready to be delicately transferred to a small container filled with your growing medium of choice (rockwool, coco-fibre, or soil).
Make a hole in the growing medium that is 2 – 5 mm deep. Use tweezers or your fingers to transfer germinated seeds gently into the hole (root pointing down) and lightly cover with a fine layer of your medium. Do not pat it down too hard. The stem and the first tiny set of leaves, called cotyledons or ‘seed leaves’, should begin to emerge 24 to 72 hours after the seeds are planted.
4. Supplying a light source
Seedlings must be exposed to sunlight once they sprout. Ensure this is a gradual process as too much heat causes stress and will stunt growth.
Find a sunny place where you can begin to increase sun exposure, such as a windowsill. Ensure sun exposure is increased by an hour or so a day.
For an indoor plant you can use a fluorescent light (keep normal distance from bulb) or HID lighting (50-80 cm from the bulb).
Take care in the first week or two, as seedlings are still quite delicate and sensitive to the elements. They won’t need a lot of attention until the vegetative stage so avoid overhandling.
Germination is the beginning stage of the growing cycle, and this easy-to-follow guide gives your premium genetic cannabis seeds the best start to life. Whether you are a first-time home grower or a well-seasoned gardener, share your experience or any questions in the comments down below, as well as your tips and tricks!
Sensi Seeds CBD: Seeds, Oils, Capsules — How They’re Made
Laws and regulations regarding cannabis cultivation differ from country to country. Sensi Seeds therefore strongly advises you to check your local laws and regulations. Do not act in conflict with the law.
22 thoughts on “How to Germinate Cannabis Seeds”
Hi, Once seeds have sprouted, how long can or should you leave them to grow under 24 hr lights before moving to your outdoor garden?
Good afternoon Ken,
I hope you’re having a great day.
For the vegetation process, a light schedule of 18 hours of light, and 6 hours of darkness is preferred. Many growers get plants acclimatized to outside by placing them in a window, or under direct sunlight for a few hours a day.
Thanks again, and have a great day!
Hello everyone, all these suggestions are wonderful but I think a lot of you make it sound a little overwhelmingly. I’ve been very successfully cultivating for decades and I’ve always just placed my seeds, be it 1 or 100, in between 2 folded sheets of tissue which I’ve made wet with tap water. I then place them on a tray or plate in a warm dark area , such as an airing cupboard and leave for how ever long they take usually, 12 to 24 hours. The ONLY thing I do which takes effort is PH balance the water I germinate them in and I’ve only lost 5 seeds in nearly 40 years .
Good afternoon Paul,
I hope you’re having a good day,
Thanks for sharing your experiences with germination. pH balancing is a great tip You also might be interested in our new Jamaican Pearl Feminized Grow Report
Thanks again, and I hope you continue to enjoy the blog,
I lightly score my seeds by shaking them inside a rolled up piece of sandpaper – sandpaper side on the inside before leaving them in a cup of water for a few hours to hydrate. I then place them between wet (good quality) paper towel per instructions above. I find using an old plastic takeaway container with a heatmat below keeps the humidity high and with good end results.
Good morning Jonny,
Thanks for sharing your methods for germination with us, the heat mat and low-humidity are great tips!
Thanks again, and I hope you continue to enjoy the blog,
I have found out that the best and fastest way is to take a glass of clean/filtered water and place the seed right on top of the water (floating – NOT immersed in it!). If the seed is viable it will sprout in no more than 48 hours. Right after that you plant it in your pot/soil etc and you’re done.
Good morning Mary Jane,
Thanks for your support, and for sharing your experiences with germination!
You might also be interested in our article on The Life cycle of Cannabis: From seed to harvest.
Have a great day!
What happend if they sink I had em sink they came out fine
Are you saying they sprout in the glass of water and don’t “drown”?
Take aluminum foil flatten it out and put on top of your dirt it detects planes and grow it just like a tomato plant
Good morning Tammy,
Thanks for getting in touch with Sensi Seeds, and sharing your germination method with us!
Thanks again, and I hope you continue to enjoy the blog.
With best wishes,
Detects planes? Like magnetic? I’ve always has best success 24-48 hours soaked In water, spring water if possible. Usually do this in a shot glass, once they pop I’ll take a paper towel fold so it’s 2 layers then fold once more so you know where center is. Dump the seed in the middle of the edge and the true center (reason we folded a 2nd time)as well as the water just enough to saturate the paper towel. Do not soak! Carefully with the seed in the middle using sterile tweezers turn so the tap is growing down. This will prevent circling and tangling if doing multiple seeds. Now you can fold the other half so your seed will be “sandwiched” between 2 layers. At this time carefully take a corner and the waters attraction should keep your paper towel from unfolding but just in case be gentle. Holding it from 1 corner you can dangle it over a cub or the original shot glass so any extra water runs off. Now take a standard zip or press n seal sandwhich bag and slide your napkin in Carefully . REMEMBER which way was down! Work the air out making jt flat snd seal. Find a temperate dark area around 70°. A cabinet works we’ll as your going to prop it up with taproot facing downwards. Now just close it up and wait in 24-72 hours checking once a day. In rare cases you could have a 1/2″ tap root in the first 24 hrs some may take 4-5 days. Once the tap is about 1/2″-3/4″ long its ready for transplant into its first small pot. With this paper towel method I typically have 100% success.
Can you leave your seed to develop longer roots in the germination phase and can this make them better to grow or is a big no no?
Last year, I had 2 seeds that had really long roots with lots of secondary roots coming out when they were planted, one of which died after a couple of weeks and the other grew into a huge plant.
The other two seeds only had a short germinated growth and both died almost immediately after planting so not sure what I can learn from this…lol
Appreciate any thoughts and advice
Unfortunately, legal restrictions mean we can’t answer grow-related questions or give grow advice on this blog. However, other readers of this blog will often answer questions like yours.
Please check out the following articles on our blog which I think you may find of use, and I hope you continue to enjoy the blog!
With best wishes,
How often do you water and how wet should the plant be? Please.
Also if they are outdoor plants do you need to keep them covered with clingfilm for a wee while or do you just hope for the best. Thanks
This article, about how to water cannabis plants, should answer your questions. I can’t help you with the clingfilm one though, as it depends on the climate. Good luck, and happy gardening!
With best wishes,
Just drop the seeds in water, they will sprout , don’t have to use a towel and check it all the time , drop it in the water , let it float then it will sink and the root will grow out ,let the root get 1/4 inch and plant it where it’s going to grow , 8 hours sunlight starting as soon as it is out of the soil. Always grows great , don’t have to transplant from cup to gallon to bigger and bigger , if it’s growing outside put it where it stays , always does just fine.
Good afternoon Graham,
Thank you so much for sharing your experiences with germination.
Thanks again for your comment, and I hope you continue to enjoy the blog.
Have a great day!
I recommend this article to all breeders and cultivators who plans to germinate seeds and to some who don’t know how to germinate seeds, this article has the best and perfect ways on how to do it.
I have large bay windows at my condo which get about 11-12 hours of light per day. They are tinted but warm. I grow other indoor plants there perfectly. Is an ok place for my pot plants?
This sounds like a great place for all kinds of plants! I recommend you have a look at autoflowering varieties, as otherwise light pollution may negatively affect the flowering cycle. Good luck, and happy gardening!
With best wishes,
Leave a Comment Cancel Reply
The Sensi Seeds Editorial team has been built throughout our more than 30 years of existence. Our writers and editors include botanists, medical and legal experts as well as renown activists the world over including Lester Grinspoon, Micha Knodt, Robert Connell Clarke, Maurice Veldman, Sebastian Maríncolo, James Burton and Seshata.
How To Germinate Cannabis Seeds
Growing your own weed is fairly easy, as explained in our article ‘All You Need For Growing Weed At Home‘. The hardest part for some growers though, is germinating their newly bought cannabis seeds. After all, the vulnerable seedlings are easily damaged. However, making sure your cannabis seeds survive germination is essential for a successful grow. In this blog, we highlight three tested methods that let anyone germinate cannabis seeds with minimal effort.
How To Germinate Cannabis Seeds, Step 1: Get Good Genetics
We cannot stress this enough. If you want good results, you are going to need good materials to start with. In case of growing cannabis, the first thing on that list are good cannabis seeds, of course. Besides high quality cannabis seeds all you need is some water, a warm environment (between 20-25 degrees Celsius) and – lack of – light to start germinating your future cannabis plants.
Even though living weed plants love (and need) a lot of light, germinating cannabis seeds thrive better in a dark environment. And just like there are different methods of growing your own cannabis, there’s also a choice in how to make your seeds sprout.
Want good cannabis? Get good seeds!
Germination is actually a process where you activate a dry seed that is in a ‘sleeping state’. By adding water to the seed, a small root that is inside the seed-shell will want to come out in search for more water. This will make it develop into a big taproot that’ll serve as an anchor for the plant and from which more roots will sprout. Read more about root-development in this article: ‘Clones vs. Seeds: What Grows The Best Cannabis?‘
Germinate Cannabis Seeds In Water
The easiest way to germinate your cannabis seeds is to let them soak in a glass of water. The seed will absorb the water and due this process hormones will make the seed start to grow: expansion and elongation of seed embryo.
You will see them sprout after 24 to max. 48 hours. Note that you need to store the glass of water in a dark place on roomtemperature. After sprouting they are ready to plant in soil, 1cm to max 2cm deep. All they now need is love, light, water and heat!
Ready to sprout!
How To Germinate Cannabis Seeds: Wet (Paper) Towel Germination
The best known way of germinating cannabis seeds is to put them on or between wet paper towels or cotton wool. This method exists in different varieties, as it’s not so much about the paper itself, but more about the absorbency of the material. It’s very easy to make sure the ‘medium’ doesn’t get too soggy and doesn’t dry out easily. If it does dry, you can effortlessly add a few drops of water to immediately re-moisten it.
Wet paper towels are probably the most common way of germinating cannabis seeds
The goal here is to balance out the moisture so it’s not too dry, nor to wet. Go for a piece of paper that is moist all over, but doesn’t drip when you pick it up. If the seeds stay to dry, the root that’s supposed to sprout won’t be able to make it out of its shell in search for water. If the paper is too wet though, the root will come out and quickly stop looking for water; as it’s already soaked in it. This stops the development of the root, delays the growth and might even cause the seeds to rot after a while. So, be careful not to give too much water as this is one of the most common rookie mistakes when it comes to growing weed!
Transplanting In Soil
After the root has sprouted and has gained a few millimetres in length, it’s time to transplant the seedling into its soil and put it under a light-source. As a rule, a small 1cm deep hole made with your fingertip should do. Gently pick up the seeds one by one, taking care not to touch the root. Use a clean pair of tweezers and don’t squeeze. Make sure that the roots don’t cling to the paper or cotton wool. Lovingly cover the seed with a little (loose) soil and add a few drops of water. Now, all you can do is wait whole the story continues below the surface. As soon as the seedling pops her head above the ground and green leaves emerge, she’ll needf light to continue growing.
This is the part where most growers (especially the hasty ones) sometimes lose a seed. Remember that you are handling a baby plant here. The vulnerable root is easily damaged during the transplant. If you don’t trust your steady hands, it might be better to choose another germinating method.
How To Germinate Cannabis Seeds In Soil
Another common method of germinating cannabis seeds, and probably the most natural one, is to stick the seeds directly in their intended medium: the soil. You can do this with or without soaking it in root stimulator for a few hours first.
By planting cannabis seeds directly in their soil or coco – or whatever other medium you might be using – growers cause the minimal amount of stress for the plant. Direct planting also allows the taproot to immediately dive as deep into the ground as possible. Furthermore, its leaves can enjoy the light as soon as they emerge from the developing seed. This way the seedling can start its growth with a fair chance, providing you with a steady, high-yielding cannabis plant.
Cannabis seeds and sprouted seedlings require constant temperatures of around 20-25 degrees Celsius
For this method, simply prepare your medium by moisturizing it, again, without soaking the soil completely. Then take your flower pots and use your finger to make a small hole about 10-15mm deep in the top layer to put the seed in. Cover the seed up loosely and top it off with a little water. Be careful not to give too much at once though! A stream of water can cause the seed to travel further down the pot where it’s too moist – and too deep to travel back up again.
The top layer is the perfect place to germinate cannabis seeds, as it dries out faster than the soil further down the pot. This makes it easier to ensure the right level of moisture for the seed to germinate. If it gets too wet, the seeds will rot in the soil. If it stays too dry, the plant will not be triggered to emerge from its shell. Again, it’s all about finding the perfect balance between too wet and too dry.
How To Germinate Cannabis Seeds in Plugs
Last but not least on this list is the germination of cannabis seeds in special plugs. These plugs are available in various materials, especially designed for quick and efficient germination of cannabis seeds.
Plugs are a practical way to germinate cannabis seeds
Most plugs are dry blocks of (usually) coco fibre. Peat plugs are an interesting alternative, as these contain some initial nutrients to help the seedling along. After fully absorbing about 500ml of moisture, or 250ml of a root booster and another 250ml water, they slowly turn into a moist, soil-like plug. Grow plugs usually have a premade hole in which to place the seed. After sticking the seed in the top of the plug, cover it lightly with a little leftover plug fibre. It takes a few days at maximum before you see the first heads pop. As soon as the roots grow out of the bottom or the side of the plug, you can stick the entire plug, complete with its seedling, into your intended medium. These plugs make germination and the initial transplant a piece of cake.
A fantastic view on this seedling with it’s shell sticked to her leaves
After Germination: Growing Your Seedlings
So there you have it: whichever method you chose, germination should now be underway. Remember that even the best seed banks work with organic, natural materials, so 100% germination rates can never be guaranteed. If you get your technique right, though, most or all of your seeds should germinate according to plan. Once your seeds have become seedlings, the next steps of your grow await. There’s a lot of choices to make from here to harvest time: indoor or outdoor, which spot to pick, what nutrients to use, and so on. Keep an eye on our expanding grow blog collection if you want to learn more!