Jorge’s Cannabis Encyclopedia: Seed Germination
Cannabis seeds need only water, heat, and air to break dormancy and germinate; they do not need extra hormones, fertilizers, or additives. Seeds sprout without light in a range of temperatures. Strong, viable, properly nurtured seeds germinate in 2 to 7 days. At germination, the outside protective shell of the seed splits, and a tiny, white sprout (radicle) pops out. This sprout is the root, or taproot. Cotyledon, or seed, leaves emerge on a stem from within the shell as they push upward in search of light.
Break dormancy: Put newly harvested seeds in the refrigerator for a week or two to simulate winter. Remove and germinate. Seeds will germinate more uniformly because they all come out of dormancy at the same time.
Timeline for Germinating Most Seeds:
At 36 to 96 hours – Water is absorbed, root tip (radicle) pops through outer shell and is visible.
At 10 to 14 days – First roots and root hairs become visible.
At 21 to 30 days – At least half of seeds are rooted by day 21. Seeds not rooted by day 30 will probably grow slowly.
Once seeds are rooted, cell growth accelerates; stem, foliage, and roots develop quickly. Seedlings develop into full vegetative growth within 4 to 6 weeks of germination.
Seeds are Prompted to Germinate By:
Water: Soaking seeds in water allows moisture to penetrate the protective seed shell within minutes. Once inside, moisture continues to wick in to activate the dominant hormones. In a few days, hormones activate and send enough signals to pro- duce an initial root tip. The white radicle (rootlet) emerges to bring a new plant into the world. Once a seed is moist, it must receive a constant flow of moisture to transport nutrients, hormones, and water so that it can carry on life processes. Some seeds need lots of moisture to wash out the dormancy hormones in the seed coat, and if they do not get enough moisture, they do not germinate. Conversely, too much water deprives the seed of oxygen, reducing its quality or destroying it. If fragile germinated seeds are allowed to suffer moisture stress now, seedling growth will be stunted. Soaking most seeds in water for 12 to 24 hours is all they need to initiate germination. All the nourishment for a seed’s initial growth requirement is pulled from the fleshy cotyledons, or seed leaves. Water seedlings with low-EC (electrical conductivity) household tap water during the first week or two of life. Supple- mental nutrients are unnecessary and if applied in excess can disrupt internal seed chemistry. Some gardeners prefer to germinate seeds using distilled or purified water that contains virtually no dissolved solids.
Temperature: Overall, cannabis seeds germinate in temperatures from 70°F–90°F (21°C–32°C) and grow best at 78°F (26°C). Temperatures below 70°F (21°C) and above 90°F (32°C) impair germination. Low temperatures delay germination. High temperatures upset seed chemistry causing poor germination. Seeds germinate best under the native conditions and temperature ranges where they were grown.
Air & Oxygen: Sow seeds twice as deep as the width of the seed. For example, 0.125-inch (3 mm) seeds should be planted 0.25 inches (6 mm) deep. Adequate oxygen is un- available for seeds planted too deeply, and tender seedlings have insufficient stored energy to drive through deep layers of soil or crusty hard soil when sprouting.
Agricultural Astrology — Planting by the Moon
Ancient Babylonians and Egyptians planted and harvested based on moon phases in relation to geographic location. The premise is that plants grow better when planted during the appropriate moon phase.
Moon phases cause ocean tides to rise and fall. They also affect the rise and fall of moisture in soil and fluids inside plants. The moon phase influence is said to be the same indoors, outdoors, and in greenhouse-grown cannabis.
Cannabis gardeners who plant by the moon report faster-sprouting seeds that grow into vigorous plants. However, scientific evidence is lacking in regard to cannabis and other plants’ relationship with agricultural astrology.
Seeds need oxygen from the air to germinate. Growing mediums that are too moist (soggy) will cut off oxygen supplies and the seeds will literally drown. Cannabis seeds germinate best when moisture is between 60 and 70 percent.
How to Grow Marijuana from Seed
If you’re in a location where cannabis (another term for marijuana; short for the plant cannabis sativa) is illegal, growing it is probably illegal too. Bringing in seeds or cuttings to your location can very well be a felony, and reputable sellers won’t ship to you.
You can probably purchase and grow hemp seeds and plants, which have a negligible amount of THC, but these plants won’t produce the psychoactive effects of plants that contain higher levels of THC. Check with your seller to be certain you’re getting what you think you’re purchasing. If you buy seeds for CBD-only hemp plants by mistake, you can end up being very disappointed post-harvest.
How to acquire seeds or cuttings
You can usually find cannabis seeds for sale at most dispensaries in areas where growing cannabis for personal use is legal. You may also find growers who sell cuttings/clones. You can expect to pay $50 to $100 for a pack of ten seeds. When shopping for seeds or cuttings, read the labels and any other information the manufacturer provides on its website or in its catalog to make sure you’re getting the right seeds or cuttings (the strain) for the plants you want to grow.
One way to get your mitts on some seeds is to collect seeds when you find them in flowers you purchased, or get some from friends if they’re collecting.
- Feminized seeds: Nearly all seeds sold by reputable companies are feminized, but make sure they are. These seeds are specially treated to grow into female plants.
- Auto-flowering or photoperiod: Auto-flowering plants are easier, because they enter the flower stage after a certain number of weeks regardless of the light/dark cycle. If you’re a beginner, seriously consider going with auto-flowering plants.
- Genetic background: If seeds are from a well-established strain, such as O.G. Kush, Bubble Gum, or a cross-breed, the genetic background should be stated.
- Blend: The blend represents the percentage of the three species — sativa, indica, and ruderalis. All auto-flower strains contain some percentage of ruderalis, which is responsible for the auto-flowering nature of the plant.
- Yield indoors: The number of grams of bud per square meter of plant when grown indoors.
- Yield outdoors: The number of grams of bud per plant (after drying) when grown outdoors.
- Plant height indoors: Shorter than when grown outdoors.
- Plant height outdoors: Taller than when grown indoors.
- Time to harvest: Approximate number of weeks after germination the flower should be ready to harvest.
- Potency: Percentages of CBD and THC.
- Effect: The type of experience you can expect when consuming product from the plant.
Know the laws about buying cannabis
- In some European countries, laws prohibit growing cannabis, but seed is legal, which is quite confusing. You’re allowed to buy and eat cannabis seeds because they’re non-psychotropic, but you can’t buy them to grow cannabis. Other countries in Europe, such as Germany, have their own seed laws.
- In Canada, where cannabis is federally legal, seeds can be shipped across provincial lines.
- In the U.S., in some states in which cannabis is legal, you can purchase seeds from some dispensaries or other locations to grow plants as long as you keep them in the state. Other states may bar selling to non-licensed growers. Shipping or transporting seeds across state or international borders is illegal, although a few reputable online seed stores ship to individuals with success.
Cuttings are typically treated in a similar manner as seeds in legalized locations. They may be available from some dispensaries or outlets for pick up or delivery with a fee. They’re prohibited from crossing U.S. state lines or international borders. You can buy individual plants and mix and match strains. Prices vary and are often determined by plant size.
Buy cuttings (clones) only from a reputable source who understands proper back-crossing of strains for stability. Back-crossing involves pollinating a plant with one of its parent plants to promote sexual stability, so that when you have a female it won’t hermaphrodite into a male during flowering.
Both seeds and clones are often able to be purchased from commercial locations already in your state.
In the U.S., transporting any part of the cannabis plant over state lines is illegal. This applies to seeds and clones and, technically, even to tissue samples.
How to germinate cannabis seeds
Germinating seeds requires a dark environment that is around 70 degrees. There are many ways to germinate seeds (in soil, in a wet paper towel, in starter plugs) You can also sow them directly into soil in a garden or container, as long as the soil is light and fluffy, so the roots can easily grow down and the stalk can break through the soil. Plant the seeds about 1/4- to 1/2-inch deep and cover them loosely with soil.
Most importantly, seeds need a moist environment; they won’t germinate if they get too dry. You can use a heat mat to increase the success of germination in colder climates.
How to transplant marijuana plants
When transplanting any plant, whether it started from seed or a clone, handle it gently, being very careful not to damage the roots. Center the plant in the pot, and plant it deep enough to cover the root ball completely in soil. If the plant is root bound, you can gently tease the roots apart to encourage outward growth.
Pack your soil or other grow medium down around the roots well enough to support the plant while new roots grow, but not so tight that the soil restricts outward root growth. Water the soil around the roots.
About This Article
This article is from the book:
About the book authors:
Kim Ronkin Casey has been a communications professional for more than 20 years and recently took a year-long leap into the world of cannabis as the communications manager for one of the leading dispensaries in North America. She now consults for companies in the industry on internal and external communications. Joe Kraynak is a professional writer who has contributed to numerous For Dummies books.
How to prevent the death of cannabis seeds and seedlings
Every grower, almost without exception, will have occasionally suffered the death of a plant during cultivation, just when it seemed that everything was going along nicely. In this article, we’ll focus on the main reasons why seeds may not germinate properly, or why seedlings may end up dead in the first weeks of life.
Seeds dying before germination
Cannabis seeds can die even before we start to grow them, in which case, when the grower comes to germinate them, they won’t open up and sprout at all.
The seeds of the cannabis plant, like many other types of seeds, must always be kept in the correct conditions, especially if you want to save the leftover seeds for later use and ensure that they germinate well in the future.
The same goes for unopened whole packs of seeds that have been purchased to store for later use. Sometimes, certain varieties are in high demand and there is limited stock, so the more astute growers will make sure they grab a few packs to keep in the vault until they find the time to germinate the cannabis seeds.
Cannabis seeds must be stored in the correct conditions
What to do with leftover seeds or unopened seed packs
Cannabis seeds need very low relative humidity and relatively low temperature for their proper storage, so the best plan is to keep them in a “no frost” refrigerator, in which both the humidity and temperature are maintained at very low levels for better conservation of food.
If we want to keep a seed package that’s still sealed, simply put the whole unopened pack into the fridge. The best place for its conservation is usually the small shelf where the eggs or butter are kept, although really any part of the fridge is ideal for storage.
If we want to save the leftover seeds from a pack for later use, we recommend storing them in the original Eppendorf tube or container used by the bank. In the original packaging, these Eppendorf tubes hold the seeds and usually also contain a few small silica gel balls, included to maintain very low humidity (10 to 20%) and help to ensure that the seed does not lose any germination viability.
If, however, we leave the seeds for a long period of time in any corner of the house it is possible that over time their viability to germinate will decrease, and when we plant them they may take a long time to germinate or indeed not germinate at all. it is also important to protect them from sunlight.
So if you wish to save the seeds in the best conditions, always keep them in the refrigerator, well protected from air, light and moisture.
How do we store leftover seeds to grow at a later date?
Death during the germination of cannabis seeds
Death during the germination of cannabis seeds is one of the most frequent failures suffered by every grower over the course of his or her cultivation career. There are several possible reasons that can lead to the seeds dying before they even open and begin to grow, which we’ll examine here.
Not all seeds have the same resistance to the errors that may occur during the germination process. Just as not all siblings are not all equal, neither are all seeds. By this, we mean that in the case of one seed germinating and the rest of them not doing so, it doesn’t necessarily mean that those that didn’t germinate were not strong or resistant, but simply that they were less so than the one that did germinate. If this occurs, we must ask ourselves why they did not germinate and look for any possible failings in the process.
Death by drowning the seed during germination
We start from the basic premise that the seeds require moisture, oxygen and a suitable temperature for germination; If one of the three aspects is not taken into account, it is quite likely that the seeds won’t end up germinating.
Putting the cannabis seeds in a glass of water and waiting 24 to 48 hours for their germination can be a fatal error for them. Re-hydrating the seeds in water is a good idea as long as they are not out of contact with the air for long, as they will be deprived of oxygen and most of the time they will end up dying; so if we use this method, we only leave them to re-to hydrate in water for a few minutes, although, preferably we will avoid any previous soaking or re-hydration (which in any case is not necessary).
We must maintain suitable levels of humidity for germination
The reason for this is that tap water contains chlorine, which sterilises the water to make it suitable for domestic use. However, this chlorine disappears by evaporation after a few hours, so if the water then gets contaminated, the seed can be attacked by any number of pathogens and eventually die. This example also illustrates why we must always touch the seeds with clean hands; If the seeds are handled with dirty fingers, it can lead a fungal or bacterial infection to contaminate them and severely compromise their development.
The same can happen in other germination media such as jiffy plugs, where the most common mistake is usually not draining away the excess water after re-hydrating the compressed peat. To this error, we can add that of burying the seed at more than twice its own depth, in which case it may not emerge despite having germinated perfectly well, but instead, simply end up rotting due to excess water and lack of oxygen. This error is also frequent in growers who germinate directly in the soil because when they first irrigate, the seed can be washed down into the soil resulting in them being buried too deeply, which makes it difficult for the seedling to reach the surface. It is always better to wet the substrate first, before sowing any seeds.
If you want to sow the seed directly into the soil and do it properly, when growing outdoors you must also act to prevent seed predators. Ants, birds, and many other animals or insects are another common cause of seed failure during germination. In the case of ants, they eat the small, delicate root, leaving the plant unable to develop and condemning it to imminent death.
Placing the seeds between moist serviettes/paper towels is one of the best germination methods for beginner growers. Since you can easily see if the seed has taken root or not. But we must also bear in mind that the germination medium, the kitchen paper, is made of cellulose, meaning it is an organic material that will decompose and rot, just like any product of this type.
Planting the germinated seed is also a crucial moment
It is, therefore, obligatory to change the napkins every day and a half, more or less, to avoid the seeds being contaminated by the pathogens that can appear as the napkins begin to rot. For this reason, we recommend placing the napkins in a deep plate and covering it with another one, leaving a small gap between the two so that air can enter, oxygenate the microclimate that is created during the germination of the seeds and avoiding them rotting.
Seeds dying due to lack of moisture
Just as excess water is one of the most common causes of germination problems, the lack of moisture is equally detrimental to the process.
If outdoor temperatures are around 20 to 24ºC, then we shouldn’t need do much more than start the seeds to germinate and wait for them to open, following the precautions already discussed. But in case of having warmer or cooler temperatures, we must act to raise or lower the environmental temperature for optimal germination, and find the best location for germination to be successful.
If it is winter, the plates holding the seeds are often placed on top of a low heat source to raise the temperature. We must, however, be careful: if this heat source emits hot air, the paper towels will dry out and the seeds will run out of moisture, affecting germination. If you realise this in time, you can re-hydrate the seeds and they will usually recover from and continue to germinate, although it is also possible that there will be consequences that may affect the subsequent development of the plant during its cultivation.
Not long after sowing the seed, we will see our little plant emerge from the soil
If we haven’t noticed soon enough that the seeds have been left without moisture, we can assume that they will have dried up completely, with their consequent death, and this is even more likely if the seeds had already opened up to show the root. This can also happen very easily if we germinate during summer when temperatures are high and humidity is usually very low compared to other times of the year.
Death of the plants during the growth period
The start of the growth period is a very important stage in a plant’s life, so several aspects must be taken into account so that it does not die of any of a number of causes.
One of the most frequent problems is root rot due to excess irrigation and lack of oxygen in the substrate. Up till now, this has been one of the most common causes of plant death during the growth period, especially with beginner gardeners who lack previous cultivation experience. In addition, the likelihood of this happening increases considerably in crops with auto-flowering varieties; we’ll explain what to do here.
When the plant emerges from the substrate, leaving behind its germination stage, it is crucial to take care with any excess water and the lack of humidity in its aerial parts such as leaves, stems and branches.
The proper conditions guarantee good germinación
When the plant is young and only has a very small root, its needs are few, it feeds and drinks very little. If we saturate the substrate with too much water, apart from halting the growth of the root (leading to little or no growth in the aerial parts), it creates the ideal conditions for the small roots to slowly rot. If the plant loses a part or all of its tiny root system in its first stage of life, it is almost guaranteed that it will die within a few days.
If we use a small 0.5L to 1L plant pot for the first part of vegetative growth, before transplanting them to a bigger pot, we will be covering our backs in case of any excess of irrigation, since the substrate will dry out again much faster than in larger pots. For this reason, this issue is very common for novice growers who are cultivating auto-flowering cannabis plants, where the use of 20L pots is recommended from the start.
It is often said that you must irrigate with an appropriate amount of water and nutrients for the size of the plant. As this is often complicated to carry out, as a rough guide we can irrigate the plants with an amount not more than 10 or 20% of the plant pot’s capacity. So, if they are 1L pots we will water from 100 to 200ml as long as it is not an auto-flowering plant.
If the plan is to grow automatic varieties, then during the first two weeks we water with 100 to 350ml per irrigation, every 1 or 2 days. Remember that the substrate must maintain a minimum of humidity to allow the plant to feed and continue to develop normally. If it is raining and the plants are outdoors, it’s a good idea to move or cover them, to prevent the substrate from getting soaked, which could easily lead to root zone problems.
The first stages of growth survived with success!
We hope that this information will be useful and help to stop your seeds and seedlings dying. Don’t hesitate to leave any comments or questions, we’ll be pleased to help.
The articles published by Alchimiaweb, S.L. are reserved for adult clients only. We would like to remind our customers that cannabis seeds are not listed in the European Community catalogue. They are products intended for genetic conservation and collecting, in no case for cultivation. In some countries it is strictly forbidden to germinate cannabis seeds, other than those authorised by the European Union. We recommend our customers not to infringe the law in any way, we are not responsible for their use.